Solar Controller LCD CM3048 30A 48V PV panel Battery Charge Controller for Solar system

Solar Controller LCD CM3048 30A 48V PV panel Battery Charge Controller for Solar system
  • Продавецjllbetwin.info
  • Список ценUS $27.30piece
  • Продажная ценаUS $27.30piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,6 (759)

Oписание продукта

 

-1

 

TRIRON SERIES Modular MPPT charge controller,Epever solar regulator.

 
Product models:
40A,12V/24VDC Auto,max PV input voltage is 100V.
PV input power : 520W/12V 1040W/24V.
 
 
The TRIRON series controllers are modular-designed products based on nine MPPT solar controller models. The main unit (Power Module) is a solar controller which can be integrated with different display and interface modules to meet a variety of functional requirements. Among them, the master and slave interface module can synchronize and view the controller and inverter operating data on the LCD.
 
Optimizing the MPPT control algorithm further to ensure minimum power point loss rate and loss time, and quickly track the maximum power point to obtain the maximum solar energy of PV array in any environment. Meanwhile, TRIRON controller adds automatic limit function of charging power and current, so that the controller would not be damaged even connecting oversized PV modules (the actual working value would not be higher than rated value).
 
The controller adopts the three-stage charging mode, and has perfect electronic protection function, which can effectively extend the battery life, improve the system performance, and ensure the system safety, stability and long-term operation. TRIRION controller can be widely used in RV, telecommunication base station, household system, field monitoring, etc.
 
 

Product Features:
• Self-identifying, load the driver for each module
• Modular design, varied combination to meet different requirements
• Support the hot swapping function(only for same model)
• Advanced MPPT control algorithm to minimize the MPP loss rate and loss time
• Ultra-fast tracking speed, and high tracking efficiency ≥99.5%
• Accurately tracking and recognizing of multiple MPP 
• Peak conversion efficiency of 98%
• Auto limit function of charging power and charging current.
• Compatible with lead-acid batteries and lithium batteries
• Wide MPP operating voltage range
• Full load operation during the working temperature range
• Auto reduce power function when charging in high temperature
• Multiple load work modes
• Battery temperature compensation 

• Real-time power statistics recording function

• Multiple LCD and LED display modules optional
• Master-slave interface module design, simultaneously view the controller and inverter operating data
• Dry contact design, remotely switch on/off external equipment
• Dual USB design, supply DC power for electronic equipment
• Perfect el
ectronic protection function

 

Protection function :

• PV over current protection 
• PV short circuit protection 
• Lithium battery low temperature protection 
• Night reverse charging protection 
• Battery reverse polarity protection 
• PV reverse polarity protection
• Battery over discharge protection 
• Battery over heat protection 
• Battery over voltage protection 
• Load short circuit protection 
• Load overload protection 
• Controller overheating protection 

 
LCD display : 
LCD display the detailed operating data of the controller including:
voltage, current, power, capacity etc., and set part parameters.
Co-use with the RCM interface module, can synchronously display the operating data of the inverter.
 
 
Interface module : 
UCS module ; Output type
U (short for USB):USB output,provide power to DC devices
C (short for COM): with COM port
S (short for SLAVE) :Controller as slave, PC software & mobile APP can remotely monitor the controller status through this port
 
Accessories:
This kind of controller can connect with this part item use:
1,Remote Meter(MT50):Set the controller parameter via the LCD display
2,Data logger (eLOG01):Real-time parameter recording of the product through the RS485 communication mode
3,Bluetooth adapter(Box-BLE-01):with 2m communication cable( for the controller with RS485 port )
4,WIFI adapter(eBox-WIFI-01):with 2m communication cable( for the controller with RS485 port )
5,Remote temperature sensor : RTS300R47K3.81A(3m)
6,Communication cable : CC-USB-RS485-150U-22AWG,USB to RS485 PC communication cable (1.5m)
7,OTG cable(OTG-12CM):Connect the controller to mobile APP
 
 
Software : 
PC software,Mobile APP (For Andriod System).
 
 
Electrical parameters:
U5
 
 
 
U1
 
 

U2

 

U3

 

 

 

                 

LFD_5734LFD_5740